The cord King FM-50 is a Canadian built firewood processor. The machine under study was processing hardwood tree lengths and tree sections which had been culled from sawlog and veneer logging operations. With approximately 50% of the bolts cut only and 50% having to be split after cutting, net firewood production was in the order of 3.75 full cords per pmh.
The S.L.R.-200 is a sliding-boom delimber attachment which uses two sets of delimbing grapples. Each of them can delimb one or more trees at a time and each has its own toping saw. The study concluded that a productivity increase over single head delimbers in the order of 25% to 30% can be expected.
The study compares the performance of skidders with 5 and 6-cylinder Deutz 912 air-cooled diesel engines with similar skidders using naturally-aspirated GM-3-53 liquid-cooled engines. Fuel consumption, mechanical reliability, noise level and conversion cost data are given.
Seed-bearing cones are collected by picking from felled trees, by tree climbing or by helicopter. Aerial collection had the advantages of speed, off-road mobility and free choice of the best trees. FERIC monitored 12 aerial collection operations which used several different devices suspended underneath, and manual clipping from helicopters. This report describes production rates and costs for the different tree species, flying conditions and collection systems.
Truck-unloading activities were analyzed at 11 coastal sites. Activities which affected other trucks (queuing, binder removal, unloading, on-line trailer hoist) were separated from those not affecting other trucks (yard travel, weighing, fueling, watering, delays, off-line trailer hoist). Combined unloading times varied 8 minutes for the "fastest" site to 31 minutes for the "slowest".