La présente proposition de valeur résume les conclusions des différentes études menées au Canada et aux États-Unis, lesquelles identifient les menaces ou défis ainsi que les différentes occasions qui se présentent pour l’industrie du bois de la deuxième transformation, en particulier pour les quatre secteurs suivants : revêtements de plancher, patios et terrasses, parements extérieurs et armoires de cuisine. Le but ultime de cette proposition est de dresser les pistes de recherche afin de maintenir ou d’accroître les parts de marché des produits du bois existants ou de gagner des marchés avec des produits novateurs. Ce rapport évalue également les priorités d’actions en fonction des menaces ou défis auxquels l’industrie fait face.
The fire resistance of cross-laminated timber (CLT) could be improved by treating the lamina with fire retardants. The major issues with this technology are the reduced bondability of the treated lamina with commercial adhesives. This study assessed several surface preparation methods that could improve the bondability and bond durability of fire-retardant treated wood with two commercial adhesives. Four surface preparation methods, including moisture/heat/pressure, surface planing, surface chemical treatment, and surface plasma treatment were assessed for their impact on the bondability and bond durability of lodgepole pine lamina. The block shear test results indicated that all surface preparation methods were somewhat effective in improving bond performance of fire-retardant treated wood compared to the untreated control wood samples, depending on the types of fire retardants and wood adhesives applied in the treatment process and bonding process. The selection of surface preparation, fire retardant, and wood adhesive should be considered interactively to obtain the best bond properties and fire performance. It may be possible to effectively bond the treated lamina with PUR adhesive without any additional surface preparation for the fire retardant used in the treatment at FPInnovations.
FPInnovations investigated the possibility of collecting real time temperature-altitude data that could be used to determine the stability of the atmosphere. Unstable atmospheric conditions have been associated with erratic and extreme fire behaviour. An increased awareness of atmospheric stability conditions would provide fire managers an additional tool to plan firefighting activities. A firefighting aircraft with a specific sensor was sourced and two years of data was collected and analysed to determine if temperature profiles could be built using the data. Results show the data was sufficiently accurate and was collected at a frequency where temperature lapse rates can be calculated, and the stability of the atmosphere in the area of a fire could be determined.
Hemlock can have higher moisture content than most other native trees, causing them to sink. Hemlock lumens have large pits (valves) that allow easy transport of water into the wood.
Bigger rings = bigger lumens. Younger hemlock or hemlock tops are more susceptible to sinking. The bigger the rings the more likely to take on water.
This guide provides users with easy to use charts to assist with the design of geosynthetic-reinforced unpaved roads over weak soils. It permits the estimation of key input parameters through simple procedures and judgment based on experience. Further optimization of designs may however be possible through detailed calculations and lab testing which are encouraged
Ce guide propose des graphiques simples d’utilisation afin d’aider les utilisateurs dans la conception de routes non revêtues renforcées avec des géosynthétiques. Il permet d’estimer les principaux paramètres d’entrée à travers des procédures
simples et le recours au jugement découlant de l’expérience. Lorsque possible, le recours à des essais en laboratoire est préconisé pour l’obtention de certaines données d’entrée.
La construction massive en bois est un terme générique qui englobe une grande variété de produits du bois épais et lourds, notamment le bois lamellé-croisé (CLT), le bois lamellé-goujonné (DLT), le bois lamellé-cloué et le bois lamellé-collé (GLT). À ce jour, les méthodes de conception à vibrations contrôlées ont surtout été élaborées pour les planchers en CLT.
Mass timber is a generic name for a broad range of thick and heavy wood products such as cross-laminated timber (CLT), dowel-laminated timber (DLT), nail-laminated timber (NLT), and gluelaminated timber (GLT), among others. So far, vibration-controlled design methods have been developed mostly for CLT floors.
Alberta Agriculture and Forestry (AAF) asked FPInnovations to conduct a field trial of two heavy helicopters that had recently been installed with on-board injection and mixing systems. The study focussed on determining the accuracy and reproducibility of these systems to produce effectively mixed water-enhancers for aerial delivery during wildfire suppression operations.
These field trials were conducted north of Slave Lake, Alta. in June 2020. This report discusses the background, methodology, and outcomes of this equipment validation test.
The ongoing evolution of remotely piloted aircraft systems (RPASs) with recent advances in micro-sensors and imaging software has the potential to enhance the delivery of infrared imaging services for wildfire operations. Understanding the capabilities and limitations of these aircraft will aid wildfire managers in selecting appropriate RPAS platforms as another "tool in the toolbox" for hotspot detection missions on wildfires.
The current regeneration challenges posed by salvage logging following large-scale disturbances in western Canada, such as wildfire and mountain pine beetle, warrant the need for cost-effective reforestation strategies. Mechanized ground-based direct seeding was assessed in a variety of conditions to explore viability, determine which factors influence success, and determine the expected establishment rate when seeding with B.C. tree species. This report includes guidelines and recommendations for implementing direct seeding in B.C., based on observations from operational trials established in 2013-2017 across the province.
This study tested ultra-high molecular weight polyethylene (UHMWPE) ropes for log load securement. Destructive testing of used rope samples done in a previous project found that the strength of these ropes decreased with use. To address this problem, the diameter of the synthetic rope was increased. In addition, a different type of rope with a UHMWPE inner core covered with a polyester protective jacket was tested. The outer jacket protected the inner core from dirt and abrasion which may help mitigate the loss in strength that occurs with use. Wrappers were put into service and tested for breakage after three and six months of use.
Cette étude a évalué des câbles en polyéthylène de poids moléculaire ultra élevé (PEPMUE) pour sécuriser des chargements de billes. Des tests destructifs d'échantillons de câbles usagés effectués dans un projet précédent avaient révélé que la résistance de ces câbles diminuait avec l'utilisation. Pour résoudre ce problème, le diamètre du câble synthétique a été augmenté. De plus, un autre type de câble avec une âme intérieure en PEPMUE recouverte d'une gaine de protection en polyester a été testé. La gaine extérieure protégeait le câble intérieur de la saleté et de l'abrasion, ce qui peut aider à atténuer la perte de résistance qui se produit avec l'utilisation. Les câbles ont été mis en service et testés pour la résistance à la rupture après trois et six mois d'utilisation.
The City of Quesnel has applied an innovative selective harvesting technique in a mature Douglas-fir forest stand with the objectives of maintaining biodiversity and reducing fuel-load buildup and consequent wildfire threat. FPInnovations researchers monitored and documented the harvesting operations and measured machine productivity to evaluate the cost-effectiveness of the operation.
To support the assessment of fuel-load reduction, FPInnovations' Wildfire Operations group conducted fuel-sampling activities to produce a pre-harvest forest fuel inventory. The inventory data were converted to formats to be applied in two fuel-management tools: a photo guide of the pre-treatment fuel environment and a dataset that can be input to FuelCalBC
Harvest operations on soft soils can be particularly challenging in order to respect site and soil disturbance guidelines as well as operational requirements. To address the challenges of operating on soft soils, FPInnovations has worked on solutions designed to reduce disturbance on weak soils while minimizing implementation and investment costs by using machines already being used in the operation.
Hummingbird Network, a British Columbia company, presented its crowdsourcing wildfire detection concept (the Hummingbird Network Smoke Detection Service) during the 2016 Wildland Fire Canada conference. In January 2017, as a follow-up to the conference, Hummingbird Network provided a live demonstration to AAF, BC Wildfire Service, and FPInnovations in Edmonton, Alberta. After a successful demonstration, and at the request of the wildfire agencies, FPInnovations committed to working with Hummingbird Network to provide an evaluation of its wildfire detection system.
This report reviews life cycle assessment (LCA) based regulatory approaches that have been adopted in several countries to evaluate and improve environmental impacts of cosntruction products and buildings. Recommendations are provided for incorporating LCA into Canadian regulations (including the National Building Code of Canada), and for enhancing building LCA guidelines to address principles of consistency, simplicity, and representative data which can improve the effectiveness of LCA to achieve regulatory objectives. This work supports the project need of guidance for performance-based design to accelerate the introduction of wood-based systems. The findings of this review can be used to help accelerate the adoption of life cycle-based regulations for buildings and infrastructure in Canada.