Skip header and navigation

156 records – page 1 of 16.

The ability of bacteria to induce brownstain in western hemlock

https://library.fpinnovations.ca/en/permalink/fpipub5877
Author
Kreber, B.
Hedberg, B.
Date
March 1996
Edition
41145
Material Type
Research report
Field
Sustainable Construction
Author
Kreber, B.
Hedberg, B.
Contributor
Canada. Canadian Forest Service.
Date
March 1996
Edition
41145
Material Type
Research report
Physical Description
7 p.
Sector
Wood Products
Field
Sustainable Construction
Research Area
Advanced Wood Materials
Subject
Tsuga Heterophylla
Tsuga
Stain
Bacteria
Series Number
Canadian Forest Service No. 32 1/2
Contract no. 1715K024
W-1322
Location
Vancouver, British Columbia
Language
English
Abstract
Three Gram negative bacteria isolated from brownstained western hemlock were investigated for their capacity to produce hemlock brownstain. Brownstain was observed when infecting western hemlock with two bacteria. Oxygen was strongly indicated as being indespensable for the development of brownstain in infected samples. However, pH did not seem to influence the production of this stain.
Tsuga heterophylla - Stains, Chemical
Stains - Chemical
Degradation, Bacterial
Bacteria
Documents
Less detail

Advancement in osb manufacturing technology

https://library.fpinnovations.ca/en/permalink/fpipub5677
Author
Hsu, W.H.E.
Kirincic, S.
Date
January 1996
Edition
38830
Material Type
Research report
Field
Wood Manufacturing & Digitalization
Author
Hsu, W.H.E.
Kirincic, S.
Date
January 1996
Edition
38830
Material Type
Research report
Physical Description
8 p.
Sector
Wood Products
Field
Wood Manufacturing & Digitalization
Research Area
Advanced Wood Manufacturing
Subject
Thickness
Strands
Resin
Oriented strandboard
Location
Ottawa, Ontario
Language
English
Abstract
Oriented strandboard (OSB) manufacturing technology has been advancing steadily during the past few years. Today, the industry can produce higher quality OSB at lower costs than ever before in the product's history. Research results have shown that drying costs can be reduced and strand quality can be improved through proper wood yard management, and that the production efficiency can be improved through various ways of optimizing the pressing and processing operations. OSB quality has been improved and board density has been reduced by using long and thin strands in panel face layers and relatively short and thick strands in the panel core. The press times have been reduced by using higher press temperatures and higher mat face-layer moisture contents. The degree of strand alignment has been improved by controlling the falling distance from the alignment heads to the top of mat being formed. Strands alignment has been further enhanced by arranging the alignment disc gaps in such a way so that narrower strands can be aligned through narrower gaps and directed towards core while wider strands can be aligned through wider gaps and directed towards the panel surfaces. Based on these technical advancements, OSB can be produced faster and at a lower density without sacrificing quality. Consequently, the OSB industry is in the position to improve panel quality without resorting to costly options such as increasing resin content and press time.
OSB
Advancement
Strand Thickness
Strand Width
Strand Length
Resin Content
Press Temperature
Moisture
Documents
Less detail

Les alignements des machines de la scierie

https://library.fpinnovations.ca/en/permalink/fpipub41743
Author
Pleau, J.H.
Date
March 1996
Material Type
Research report
Field
Wood Manufacturing & Digitalization
Author
Pleau, J.H.
Date
March 1996
Material Type
Research report
Physical Description
73 p.
Sector
Wood Products
Field
Wood Manufacturing & Digitalization
Research Area
Advanced Wood Manufacturing
Subject
Saws
Sawing
Saw mills
Canada
Series Number
Publication spéciale SP522F
E-2915
Location
Sainte-Foy, Québec
Language
French
ISBN
0864885222
ISSN
08250030
Abstract
L'alignement précis des équipements de coupe est un moyen recommandé pour assurer la maximisation du rendement matière et de la qualité des produits manufacturés. Les tendances de l'industrie s'orientent de plus en plus vers l'utilisation de scies minces et vers une réduction maximale des dimensions-cibles. Il est essentiel pour la qualité des produits désirés que les préposés de l'entretien et de l'alignement des machines fassent un ajustement de haute précision. Le succès d'un alignement précis dépend en grande partie de la précision des outils utilisés pour accomplir ce travail. Un niveau de précision est calibré de façon telle à permettre de mesurer les déviations du nivelage par unité de millième de pouce. Ce livre propose des formules pratiques que l'expérience en milieu de travail peut mettre à profit. Les méthodes d'alignement s'appliquent à l'ensemble de la machinerie des centres de transformation: équarrisseuse-déchiqueteuse ("Chipper Canter"), scie de tête à ruban avec le chariot, scie de tête à rubans jumelés ("Twin Band"), refendeuse verticale, refendeuse à ruban horizontal, scie de tête circulaire avec le chariot et déligneuse à scies multiples ("Bull Edger").
Scieries
Machines
Alignements
Sawmills
Equipment Adjustments
Forintek Canada Corp. - Publications
Documents
Less detail

Alternate uses for wood treated with carbon-based preservatives at the end of service life

https://library.fpinnovations.ca/en/permalink/fpipub42901
Author
Stirling, Rod
Daniels, C. Robert
Morris, Paul I.
Date
March 2009
Material Type
Research report
Field
Sustainable Construction
Author
Stirling, Rod
Daniels, C. Robert
Morris, Paul I.
Contributor
Canadian Forest Service
Date
March 2009
Material Type
Research report
Physical Description
20 p.
Sector
Wood Products
Field
Sustainable Construction
Research Area
Advanced Wood Materials
Subject
Waste utilization
Utilization
Recycling
Preservatives carbon
Preservatives
Series Number
W-2976
Location
Vancouver, British Columbia
Language
English
Abstract
The absence of commercial facilities to recycle or recover value from wood treated with metal-based wood preservatives at the end of its service life is one of the most significant negative points in the generally positive life cycle analysis of treated wood. Wood treated with carbon-based preservatives (metal-free) may be far easier to recycle or recover value from since the preservatives are relatively vulnerable to thermal, chemical and biological breakdown. As a result they might be destroyed by kraft pulping, combustion or composting of treated wood. The present research evaluates the use of carbon-based preservative-treated wood in these processes. Kraft pulps produced from wood freshly treated with recommended loadings of carbon-based preservatives contained significant quantities of didecyldimethylammonium carbonate (DDAcarbonate), propiconazole and tebuconazole. However, lower preservative concentration in the wood and intensive pulping may be able to produce pulps without detectable preservatives. The azoles were also detected in significant quantities in the black liquor (DDAcarbonate was not analysed in black liquor). No azoles were found in the ash produced from combustion, but significant quantities were detected in the filtered smoke. DDAcarbonate was not detected in the filtered smoke. Analysis of DDAcarbonate in ash was inconclusive. A composting experiment has been set up and is in progress. Data on preservative breakdown during composting is expected next year.
RECYCLING
Preservatives - Carbon
Waste - Utilization for pulp
Documents
Less detail

Analysis of borate-treated L-joints after five years exposure and inspection after six years

https://library.fpinnovations.ca/en/permalink/fpipub4367
Author
Morris, Paul I.
Ingram, Janet K.
Date
July 1996
Edition
41141
Material Type
Research report
Field
Sustainable Construction
Author
Morris, Paul I.
Ingram, Janet K.
Date
July 1996
Edition
41141
Material Type
Research report
Physical Description
20 p.
Sector
Wood Products
Field
Sustainable Construction
Research Area
Advanced Wood Materials
Subject
Preservatives boron
Preservatives
Series Number
1710C487
W-1313
Location
Vancouver, British Columbia
Language
English
Abstract
As a result of its potential as an added-value, environmentally acceptable, high performance wood product, borate-treated lumber has attracted the interest of the Canadian forest products industry (Byrne 1990). One of the potential markets for borate-treated wood in Europe and North America is millwork. Currently millwork manufacturers use light organic solvent preservatives to provide durability to their products but there are a number of reasons why this situation may change in the near future. There are increasing pressures on uncontrolled emission of volatile organic solvents from treated wood and public concerns regarding some of the active ingredients now in use (Orsler and Holland 1993). The use of borate-treated wood eliminates both of these problems and may provide some additional advantages by eliminating batch processing in the manufacture of joinery. The one factor which is likely to have the greatest impact on the performance of borate-treated millwork is the mobility of the boron. Borate-treated wood is currently approved for use in exterior exposure in New Zealand provided it has a three-coat paint finish. Nevertheless there is concern outside New Zealand that redistribution of boron within the treated wood could lead to localized depletion and decay. An L-joint test of borate-treated wood was set up by Forintek to determine whether preservative depletion and subsequent decay is likely to be a problem. This report describes the performance results of this trial after six years and compares borate content of the L-joints initially and after five years exposure.
Preservatives - Boron
Documents
Less detail

Analysis of western red cedar heartwood extractives by liquid chromatography/mass spectrometry and identification of unknown compound J

https://library.fpinnovations.ca/en/permalink/fpipub1428
Author
Daniels, C. Robert
Stirling, Rod
Date
February 2009
Edition
37928
Material Type
Research report
Field
Sustainable Construction
Author
Daniels, C. Robert
Stirling, Rod
Date
February 2009
Edition
37928
Material Type
Research report
Physical Description
23 p.
Sector
Wood Products
Field
Sustainable Construction
Research Area
Advanced Wood Materials
Subject
Thuja
Thuja plicata
Series Number
General Revenue Report Project No. 3807
W-2604
Location
Vancouver, British Columbia
Language
English
Abstract
To better understand the role extractives play in western red cedar’s decay resistance, commonly detected but unknown extractives need to be identified and evaluated for their potential contribution to natural durability. A new liquid chromatography/mass spectrometry (LC/MS) method for separating extractives from western red cedar has been developed. Mass spectral detection provides useful structural information that gives increased confidence in peak identifications and helps to identify unknown peaks. Using LC/MS data, combined with data from UV and NMR spectroscopy, unknown compound J commonly found in many samples of WRC we have analysed, was identified as alpha-thujaplicin. This was known to be a major extractive in eastern white cedar but was considered to be a negligible component of WRC. Its potential contribution to the durability of WRC has not been considered in previous work attempting to correlate durability to specific extractives.
Thuja plicata - Extractives
Thujaplicins
Documents
Less detail

Avancement des travaux et rapport final projet d'optimisation d'une raboteuse : annee 1995-96

https://library.fpinnovations.ca/en/permalink/fpipub4901
Author
Laganière, B.
Date
March 1996
Edition
41727
Material Type
Research report
Field
Wood Manufacturing & Digitalization
Author
Laganière, B.
Contributor
Quebec. Ministere des Forets
Date
March 1996
Edition
41727
Material Type
Research report
Physical Description
6 p.
Sector
Wood Products
Field
Wood Manufacturing & Digitalization
Research Area
Digitalization
Subject
Planing
Planers
Optimization
Series Number
E-2796
Location
Sainte-Foy, Québec
Language
French
Abstract
Planers - Optimization
Planing
Raboteuse - Optimisation
Documents
Less detail

Biology and management of bluestain fungi

https://library.fpinnovations.ca/en/permalink/fpipub4615
Author
Uzunovic, Adnan
Date
March 2009
Edition
41414
Material Type
Research report
Field
Sustainable Construction
Author
Uzunovic, Adnan
Contributor
Canada. Canadian Forest Service.
Date
March 2009
Edition
41414
Material Type
Research report
Physical Description
4 p.
Sector
Wood Products
Field
Sustainable Construction
Research Area
Advanced Wood Materials
Subject
Stain fungal
Stain
Series Number
Canadian Forest Service No. 38
W-2664
Location
Vancouver, British Columbia
Language
English
Abstract
The objectives of the project are to determine the major source of bluestain fungi and determine the mechanisms of their dispersion, and to determine the biology and weak points of pests that may be expoited to control them.
Stain - Fungal - Control
Documents
Less detail

Bénéfices de l'optimisation du tronçonnage des bois feuillus

https://library.fpinnovations.ca/en/permalink/fpipub2631
Author
Corneau, Yvon C.
Date
March 2009
Edition
39225
Material Type
Research report
Field
Wood Manufacturing & Digitalization
Author
Corneau, Yvon C.
Date
March 2009
Edition
39225
Material Type
Research report
Physical Description
14 p.
Sector
Wood Products
Field
Wood Manufacturing & Digitalization
Research Area
Digitalization
Subject
Saw mills
Hardwoods
Series Number
Contrat d'intérêt commun no 6285
6285
Location
Québec, Québec
Language
French
Abstract
Le tronçonnage demeure pour la majorité des scieurs de bois feuillus un domaine problématique possédant un potentiel d’amélioration significatif, tant au niveau du volume sciable que du rendement valeur de la ressource disponible. La récupération de la valeur optimale d’une tige est directement liée à l’efficacité du préposé au tronçonnage. De mauvaises décisions de sa part résultent en une perte de valeur. Les principales raisons entraînant de mauvaises décisions sont la complexité et l’imprécision des lignes directrices, le grand nombre de classe de qualité, les exigences de productivité, le manque de formation et d’outils d’aide à la prise de décision. De plus, le nombre possible de combinaisons de longueur de billes et de découpes pour une même tige est assez important. L’évaluation d’une partie seulement des solutions potentielles requiert déjà un effort mental important. Un système de tronçonnage complètement optimisé demeurera probablement une solution inaccessible pour la majorité des industriels à moyen terme. Cependant, la technologie des lecteurs et des caméras progressant très rapidement, il existe une possibilité de développer un système hybride qui pourrait générer des bénéfices importants. La ressource disponible est bien souvent de piètre qualité et il est envisageable de maximiser le volume de fibre sciable en optimisant le tronçonnage selon la courbure et la géométrie des tiges. Ce projet vise à chiffrer les bénéfices potentiels de cette approche de tronçonnage et d’en valider la faisabilité économique.
Sawmilling - Bucking
Hardwoods
Documents
Less detail

Le bois canadien : naturellement renouvelable, incontestablement écologique

https://library.fpinnovations.ca/en/permalink/fpipub39870
Contributor
Forest Products Association of Canada (FPCA)
Canadian Wood Council (CWC)
Date
2009
Material Type
Pamphlet
Field
Sustainable Construction
Contributor
Forest Products Association of Canada (FPCA)
Canadian Wood Council (CWC)
Date
2009
Material Type
Pamphlet
Physical Description
22 p.
Sector
Wood Products
Field
Sustainable Construction
Research Area
Advanced Wood Materials
Subject
Building materials
Wood
Renewable natural resources
Environment
Location
Québec, Québec
Language
French
Abstract
Sustainability
Building construction - Design - Canada
Documents
Less detail

156 records – page 1 of 16.