Skip header and navigation

173 records – page 1 of 18.

Aménagement d'ouvrages temporaires pour traverser les cours d'eau, dans les chemins d'hiver au Québec.

https://library.fpinnovations.ca/en/permalink/fpipub5418
Author
Légère, Glen
Dostie, R.
Date
January 2000
Edition
36552
Material Type
Research report
Field
Fibre Supply
Author
Légère, Glen
Dostie, R.
Date
January 2000
Edition
36552
Material Type
Research report
Physical Description
18 p
Sector
Forest Operations
Field
Fibre Supply
Research Area
Forestry
Subject
Sedimentation
Quebec
Culverts
Series Number
Rapport spécial ; RS-000134
Language
French
Abstract
Durant l'hiver 1998-99, FERIC et le ministère des Ressources naturelles du Québec ont évalué trois méthodes d'aménagement d'ouvrages temporaires pour traverser les cours d'eau dans les chemins d'hiver. Ce rapport décrit en détails l'évaluation des trois techniques suivantes: un tuyau enrobé de neige, un tuyau entouré de troncs d'arbres, et une quantité importante de neige déposée et compactée. L'étude démontre que les ouvrages temporaires peuvent permettre d'éliminer les apports de sédiments vers les milieux aquatiques et qu'ils sont généralement moins dispendieux que les ouvrages permanents.
Ponceaux temporaires
Chemins d'hiver
Protection des cours d'eau
Contrôle de la sédimentation
Considérations environnementales
Coûts
Québec
Documents
Less detail

An evaluation of spreading mill biosolids in a forestry operation

https://library.fpinnovations.ca/en/permalink/fpipub40473
Author
Ryans, Mark
Date
October 2000
Material Type
Research report
Field
Fibre Supply
Author
Ryans, Mark
Date
October 2000
Material Type
Research report
Physical Description
4 p.
Sector
Forest Operations
Field
Fibre Supply
Research Area
Forestry
Subject
Spreading
Solid wastes
Pulp mills
Populus
Plantations
Operations
Advantage
Series Number
Advantage ; Vol. 1, No. 25
Language
English
Abstract
FERIC evaluated an operation in which mill biosolids were spread in a harvested poplar plantation. The operation was efficient, with spreading costs of $5/wet tonne. Spreading is a beneficial use of biosolids, but must be compared with conventional disposal methods to assess the operation's economics.
Pulp mills
Solid waste
Spreading
Forestry operations
Plantations
Poplar
Economic aspects
Documents
Less detail

Application of biotechnology to wood protection

https://library.fpinnovations.ca/en/permalink/fpipub5090
Author
Yang, D.-Q.
Date
March 2000
Edition
41940
Material Type
Research report
Field
Sustainable Construction
Author
Yang, D.-Q.
Date
March 2000
Edition
41940
Material Type
Research report
Physical Description
3 p.
Sector
Wood Products
Field
Sustainable Construction
Research Area
Advanced Wood Materials
Subject
Wood
Series Number
General Revenue Progress Report
E-3408
Location
Sainte-Foy, Québec
Language
English
Abstract
Biological Control
Wood protection - Biotechnology
Bioprotectants
Documents
Less detail

Les arches en plastiques non ondulé: un nouveau choix pour les traverses de cours d'eau

https://library.fpinnovations.ca/en/permalink/fpipub40805
Author
Partington, Mark
Date
January 2000
Material Type
Research report
Field
Fibre Supply
Author
Partington, Mark
Date
January 2000
Material Type
Research report
Physical Description
2 p.
Sector
Forest Operations
Field
Fibre Supply
Research Area
Transportation & Infrastructure
Subject
Logging roads
Roads
Culverts
Plastics
Series Number
Communiqué technique ; Routes & ponts-CT-000057
Language
French
Abstract
Routes forestières
Traversées de cours d'eau
Ponceaux
Arches de plastique
Coûts
ARCHE KWH
Documents
Less detail

Assessment of fire hazards in a wood-products manufacturing plant

https://library.fpinnovations.ca/en/permalink/fpipub5952
Author
Richardson, L.R.
Mehaffey, J.R. (Jim)
Aston, R.
Tardif, Y.G.
Batista, M.
Date
July 2000
Edition
41938
Material Type
Research report
Field
Sustainable Construction
Author
Richardson, L.R.
Mehaffey, J.R. (Jim)
Aston, R.
Tardif, Y.G.
Batista, M.
Date
July 2000
Edition
41938
Material Type
Research report
Physical Description
19 p.
Sector
Wood Products
Field
Sustainable Construction
Research Area
Building Systems
Subject
Wood
Research
Series Number
Canadian Forest Service No. 6
E-3404
Location
Sainte-Foy, Québec
Language
English
Abstract
Fire Research
Fire hazards
Wood Products
Manufacturing plant
Documents
Less detail

Assessment of two green gluing processes for finger jointing

https://library.fpinnovations.ca/en/permalink/fpipub5074
Author
Verreault, C.
Date
April 2000
Edition
41921
Material Type
Research report
Field
Sustainable Construction
Author
Verreault, C.
Date
April 2000
Edition
41921
Material Type
Research report
Physical Description
1 v.
Sector
Wood Products
Field
Sustainable Construction
Research Area
Advanced Wood Materials
Subject
Transfer
Pinus
Spruce
Joints
Gluing
Canada
Black spruce
Balsam
Series Number
Canadian Forest Service No. 2407
E-3386
Location
Sainte-Foy, Québec
Language
English
Abstract
Green finger jointing is increasingly becoming a proven possibity with three main technological processes, the New Zealand Greenweld process, the US soybean-based adhesive process and the US soybean-based adhesive process by assessing drying degrade and mechanical performance of green-glued finger-jointed material after drying. The urethane-based adhesive process was studied in a previous project. Overall, we did not observe performance differences between the Greenweld and the soybean-based adhesive processes. This was to be expected since they are both phenol resorcinol formaldehyde types of adhesives. Thus, the process choice should be made based on other considerations than mechanical performance, such as economical or procedure preferences. In comparison with the polyurethane adhesive studied before, it appears obvious that more stress concentration is present at the joint after drying because of the failure modes observed. However, with long term use, this product (the urethane-based adhesive) still needs to be studied because it is less known than the two other phenol-resorcinol-formaldehyde based processes. The results also demonstrate that green finger-jointing material, such as black spruce and balsam fir, could at least be used to produce stud grade lumber.
Forintek Canada Corp. - Report
Finger Joints
Green gluing
Black spruce
Balsam fire
Technology transfer
Documents
Less detail

Base de données sur l'équipement forestier: mise à jour 1999

https://library.fpinnovations.ca/en/permalink/fpipub3612
Author
Godin, Alyre E.
Date
October 2000
Edition
40321
Material Type
Research report
Field
Fibre Supply
Author
Godin, Alyre E.
Date
October 2000
Edition
40321
Material Type
Research report
Physical Description
2 p.
Sector
Forest Operations
Field
Fibre Supply
Research Area
Forestry
Subject
Systems
Logging
Canada
Advantage
Series Number
Avantage ; Vol. 1, No. 20
Language
French
Abstract
Équipement de récolte
Systèmes de récolte
Population de machines
Canada
Bases de données
FERIC
Abstract
FERIC fait régulièrement un sondage auprès de l'industrie forestière pour déterminer quelles sont les machines utilisées en forêt et actualiser sa base de données sur l'équipement. Le présent rapport est un sommaire de la plus récente mise à jour de la base de données et examine les tendances courantes les plus importantes dans l'industrie.
Documents
Less detail

Behaviour and reliability of wood-frame systems under axial loads exposed to fire

https://library.fpinnovations.ca/en/permalink/fpipub5084
Author
Van Zeeland, I.
Date
March 2000
Edition
41933
Material Type
Research report
Field
Sustainable Construction
Author
Van Zeeland, I.
Contributor
Canada. Canadian Forest Service
Date
March 2000
Edition
41933
Material Type
Research report
Physical Description
16 p.
Sector
Wood Products
Field
Sustainable Construction
Research Area
Building Systems
Subject
Wood frame
Wood
Timber
Systems
Resistance
Research
Building construction
Series Number
Canadian Forest Service No. 09
E-3399
Location
Sainte-Foy, Québec
Language
English
Abstract
Building construction - Fire research
Structural Timber - Fire Resistance
Wood-frame systems - Fire resistance
Documents
Less detail

Biological protection of sawlogs against bluestain : CFS value added research program progress report to March 31, 2000

https://library.fpinnovations.ca/en/permalink/fpipub4441
Author
Uzunovic, Adnan
Date
April 2000
Edition
41224
Material Type
Research report
Field
Sustainable Construction
Author
Uzunovic, Adnan
Contributor
Canada. Canadian Forest Service.
Date
April 2000
Edition
41224
Material Type
Research report
Physical Description
3 p.
Sector
Wood Products
Field
Sustainable Construction
Research Area
Advanced Wood Materials
Subject
Stain fungal
Stain
Pinus contorta
Pinus
Series Number
W-1689
Location
Vancouver, British Columbia
Language
English
Abstract
The objective of this project is to determine the technical and economic feasibility of using C97 (Cartapip 97), or an equivalent albino fungi, to control sapstain in lodgepole pine logs.
Stains - Fungal - Control
Pinus contorta Dougl. var latifolia - Stains - Fungal
Documents
Less detail

Bois résineux à valeur ajoutée : perspectives de marché des portes et fenêtres

https://library.fpinnovations.ca/en/permalink/fpipub5282
Author
Laué Guay Inc.
Date
May 2000
Edition
42152
Material Type
Research report
Field
Sustainable Construction
Author
Laué Guay Inc.
Date
May 2000
Edition
42152
Material Type
Research report
Physical Description
43 p.
Sector
Wood Products
Field
Sustainable Construction
Research Area
Advanced Wood Materials
Subject
Windows
Softwoods
Markets
Location
Sainte-Foy, Québec
Language
French
Abstract
Softwoods - Markets - North America
Doors
Windows
Documents
Less detail

173 records – page 1 of 18.