Skip header and navigation

9 records – page 1 of 1.

Advanced methods of encapsulation

https://library.fpinnovations.ca/en/permalink/fpipub6091
Author
Osborne, Lindsay
Roy-Poirier, A.
Date
November 2016
Edition
44220
Material Type
Research report
Field
Sustainable Construction
Officer, Fire Safety Group, National Research Council Canada Forestry Innovation Investment 1200
Author
Osborne, Lindsay
Roy-Poirier, A.
Contributor
Forestry Innovation Investment
Date
November 2016
Edition
44220
Material Type
Research report
Physical Description
66 p.
Sector
Wood Products
Field
Sustainable Construction
Research Area
Building Systems
Subject
Building construction
Wood frame
Design
Fire
Series Number
W-3261
Language
English
Abstract
Neither the National Building Code of Canada (NBCC) [1], nor any provincial code, such as the British Columbia Building Code (BCBC) [2], currently provide “acceptable solutions” to permit the construction of tall wood buildings, that is buildings of 7 stories and above. British Columbia, however, was the first province in Canada to allow mid-rise (5/6 storey) wood construction and other provinces have since followed. As more mid-rise wood buildings are erected, their benefits are becoming apparent to the industry, and therefore they are gaining popularity and becoming more desirable. Forest product research has now begun to shift towards more substantial buildings, particularly in terms of height. High-rise buildings, typically taller than 6 storeys, are currently required to achieve 2 h fire resistance ratings (FRR) for floors and other structural elements, and need to be of non-combustible construction, as per the “acceptable solutions” of Division B of the NBCC [1]. In order for a tall wood building to be approved, it must follow an “alternative solution” approach, which requires demonstrating that the design provides an equivalent or greater level of safety as compared to an accepted solution using non-combustible construction. One method to achieve this level of safety is by ‘encapsulating’ the assembly to provide additional protection before wood elements become involved in the fire, as intended by the Code objectives and functional statements (i.e., prolong the time before the wood elements potentially start to char and their structural capacity is affected). It is also necessary to demonstrate that the assembly, in particular the interior finishes, conform to any necessary flame spread requirements. The Technical Guide for the Design and Construction of Tall Wood Buildings in Canada [3] recommends designing a tall wood building so that it is code-conforming in all respects, except that it employs mass timber construction. The guide presents various encapsulation methods, from full encapsulation of all wood elements to partial protection of select elements. National Research Council Canada (NRC), FPInnovations, and the Canadian Wood Council (CWC) began specifically investigating encapsulation techniques during their Mid-Rise Wood Buildings Consortium research project, and demonstrated that direct applied gypsum board, cement board and gypsum-concrete can delay the effects of fire on a wood substrate [4]. There is extensive data on the use of gypsum board as a means of encapsulation for wood-frame assemblies and cold-formed steel assemblies. However, tall wood buildings are more likely to employ mass timber elements due to higher load conditions, requirements for longer fire resistance ratings, as well as other factors. There is little knowledge currently available related to using gypsum board directly applied to mass timber, or in other configurations, for fire protection. Testing performed to date has been limited to direct applied Type X gypsum board using standard screw spacing, and showed promising results [5, 6, 7]. This represents an opportunity for other configurations that might provide enhanced protection of wood elements to be investigated. Being able to provide equivalent fire performance of assemblies between non-combustible and combustible construction will thus improve the competiveness of tall timber buildings by providing additional options for designers.
Revision of March 2015 edition
Documents
Less detail

Development of performance criteria for wood-based building systems

https://library.fpinnovations.ca/en/permalink/fpipub52998
Author
Dagenais, Christian
Date
March 2016
Material Type
Research report
Field
Sustainable Construction
....................................................................................................... 12 5.3 Fire Performance
Author
Dagenais, Christian
Contributor
Natural Resources Canada. Canadian Forest Service
Date
March 2016
Material Type
Research report
Physical Description
53 p.
Sector
Wood Products
Field
Sustainable Construction
Research Area
Building Systems
Subject
Building codes
Vibration
Durablity
Energy efficiency
Air
Emissions
Accoustics
Fire
Standards
Language
English
Abstract
This report is divided into six (6) subsections related to different building performance attributes. It presents a review of current design provisions as well as an investigation and identification of gaps in current knowledge with respect to performance criteria for wood-based building systems. Lastly, suggestions related to performance criteria are given with respect to, among others, structural, sound, vibration, fire, building enclosure, energy efficiency, durability and environmental performance. The development of such criteria is fundamental for reducing the burden on early adopters and AHJs in demonstrating regulatory acceptance of innovative building systems.
Documents
Less detail

Fire behavior of next generation of cross-laminated timber : CLT manufactured with SCL and hardwood

https://library.fpinnovations.ca/en/permalink/fpipub5801
Author
Dagenais, Christian
Grandmont, Jean-Francois
Hasburgh, Laura E.
Date
March 2016
Edition
40134
Material Type
Research report
Field
Sustainable Construction
FPInnovations Fire Behavior of Next Generation of Cross-Laminated Timber: CLT manufactured
Author
Dagenais, Christian
Grandmont, Jean-Francois
Hasburgh, Laura E.
Contributor
Natural Resources Canada. Canadian Forest Service
Date
March 2016
Edition
40134
Material Type
Research report
Physical Description
30 p.
Sector
Wood Products
Field
Sustainable Construction
Research Area
Advanced Wood Materials
Subject
Fire
Structural composites
Laminate product
Timber
Hardwoods
Series Number
E4961
Location
Québec, Québec
Language
English
Abstract
The objective of this study is to evaluate the fire behavior of CLT manufactured with different types of SCL or lumber boards, namely with laminated veneer lumber (LVL), laminated strand lumber (LSL) and Trembling Aspen. The fire test data is also compared to those of CLT manufactured in accordance with ANSI/APA PRG-320 using solid-sawn lumber grades. More specifically, the study aims at evaluating the charring rates of this new generation of CLT panels as well as the impact of their manufacturing parameters.
Documents
Less detail

Fire behaviour in black spruce forest fuels following mulch fuel treatments: a case study at Red Earth Creek, Alberta

https://library.fpinnovations.ca/en/permalink/fpipub6093
Author
Hvenegaard, Steven
Schroeder, Dave
Thompson, Dan
Date
October 2016
Edition
44254
Material Type
Research report
Field
Fibre Supply
Author
Hvenegaard, Steven
Schroeder, Dave
Thompson, Dan
Date
October 2016
Edition
44254
Material Type
Research report
Physical Description
30 p.
Sector
Forest Operations
Field
Fibre Supply
Research Area
Forestry
Subject
Wildfires
Forestry
Fuel
Black spruce
Alberta
Density
Physical properties
Mulch
Forest fire
Crown fire
Wind
FOP Technical Report
FPI TR
Series Number
Technical Report ; TR 2016 n.42
Language
English
Abstract
Forest fuels engineering is one of the primary wildfire mitigation strategies advocated by FireSmart™ Canada and applied by partnering wildfire management agencies and industry operators. Fuel treatments have been extensively applied in and around communities in the wildland-urban interface, through a broad range of fuel modification techniques. A primary objective of fuel treatments is to modify fire behaviour to a ‘less difficult, disruptive, and destructive’ state (Reinhardt et al. 2008) which can allow for safer, more effective fire suppression operations (Moghaddas and Craggs 2007). Black spruce is one of the most prevalent fuel types surrounding communities in central and northern Alberta, as well as other parts of boreal Canada. The densely stocked black spruce forest stands in the Red Earth Creek FireSmart research area exhibit typical crown fuel properties of black spruce: high crown bulk density and low crown base height, which contribute to crown fire initiation (Van Wagner 1977). These fuel characteristics, combined with low fuel moisture contents and strong winds, create ideal conditions for high-intensity, rapidly-spreading catastrophic wildfire (Flat Top Complex Wildfire Review Committee 2012). Mulch fuel treatments use various types of equipment to masticate forest vegetation resulting in a reduction in crown bulk density and the conversion of canopy and ladder fuels to a more compacted and less available fuel source in the surface layer (Battaglia et al. 2010). Mulch thinning and strip mulch treatments create a more open surface fuel environment with both negative and positive impacts. Due to increased exposure to sun and wind flow, the chipped debris and other surface fuels in the open areas of the treatments dry more quickly than fine fuels in enclosed stands (Schiks and Wotton 2015). From a control perspective, the open thinned areas of the treatments allow more effective penetration of water/suppressant through canopy fuels to surface fuels (Hsieh in progress). Additionally, fine fuels at the surface of openings respond more quickly to water and suppressant application. Open areas of the treatments that have been wetted by sprinkler systems or aerial water delivery should reduce the potential for ignition and sustained burning, providing a potential barrier to fire spread. Experimental crown fires have been conducted to challenge fuels treatments in other forest fuel types (Schroeder 2010, Mooney 2013) to evaluate the efficacy of these treatments in moderating fire behaviour. Mechanical (shearblading) fuel treatments in black spruce fuels (Butler et al. 2013) have been shown to reduce fire intensity. However, documentation of crown fire challenging mulch fuel treatments in black spruce fuels is limited. Fire and fuels managers would like to evaluate the effectiveness of mulch fuel treatments in reducing fire intensity and rate of spread and, ultimately, their ability to mitigate wildfire risk to communities surrounding these hazardous fuels. Alberta Agriculture and Forestry (AAF) Wildfire Management Branch fuels managers designed the Red Earth Creek FireSmart research area with the objective of conducting research that will lead to a better understanding of mulch fuel treatments and how these changes in the black spruce fuel environment affect fire behaviour. On May 14, 2015, Slave Lake Forest Area personnel conducted an experimental fire at this site; FPInnovations and research partners collected data to document changes in fire behaviour.
Documents
Less detail

Fire behaviour in jack pine/ black spruce fuels following mulch fuel treatments: a case study at the CBCFS project

https://library.fpinnovations.ca/en/permalink/fpipub40235
Author
Hvenegaard, Steven
Date
November 2016
Material Type
research report
Field
Fibre Supply
Author
Hvenegaard, Steven
Date
November 2016
Material Type
research report
Physical Description
1 p.
Sector
Forest Operations
Field
Fibre Supply
Research Area
Wildfire Operations
Subject
Fire
Crown fire
Mulch
Treatment
Series Number
InfoNote ; 2016 n.23
Language
English
Abstract
The Canadian Boreal Community FireSmart project has been the site of several research projects designed to evaluate the efficacy of fuel treatments in mitigating wildfire. In June 2016, FPInnovations conducted an experimental crown fire which challenged a mulch fuel treatment.
Documents

InfoNote2016N23.PDF

Read Online Download
Less detail

Fire-resistance of timber-concrete composite floor using laminated veneer lumber

https://library.fpinnovations.ca/en/permalink/fpipub40133
Author
Ranger, Lindsay
Dagenais, Christian
Cuerrier-Auclair, Samuel
Date
April 2016
Material Type
Research report
Field
Wood Manufacturing & Digitalization
FPInnovations Fire-Resistance of Timber-Concrete Composite Floor using Laminated Veneer Lumber
Author
Ranger, Lindsay
Dagenais, Christian
Cuerrier-Auclair, Samuel
Contributor
Forestry Innovation Investment
Date
April 2016
Material Type
Research report
Physical Description
28 p.
Sector
Wood Products
Field
Wood Manufacturing & Digitalization
Research Area
Advanced Wood Manufacturing
Subject
Fire
Resistance
Structural composites
Wood
Concrete
Laminate product
Veneer
Floors
Series Number
E-4960
Location
Québec, Québec
Language
English
Abstract
There is a need to demonstrate how novel timber-concrete composite floors can span long distances and be a practical alternative to other traditional structural systems. Better understanding of the fire behaviour of these hybrid systems is essential. To achieve this, the fire-resistance of a timber-concrete composite floor assembly, using BC wood products, will be evaluated in accordance with CAN/ULC-S101 [2]. A 2 hr fire resistance rating will be targeted, as this is the current requirement in high-rise buildings for floor separations between occupancies. The structural behaviour of this type of system will also be assessed from conducting pull-out tests of the shear connectors. In conjunction with previous test data, the results of this test will be used to develop an analytical model to assess the structural and fire-resistance of timber-concrete composite floors. 301010618
Documents
Less detail

Foam fire-suppression system for mobile forestry equipment

https://library.fpinnovations.ca/en/permalink/fpipub39938
Author
Macey, T.
Date
December 1991
Material Type
Research report
Field
Fibre Supply
Author
Macey, T.
Date
December 1991
Material Type
Research report
Physical Description
4 p.
Sector
Forest Operations
Field
Fibre Supply
Research Area
Forestry
Subject
Fire
Safety
Equipment
Forestry
Series Number
Technical Note Wood Harvesting ; TN 175
Language
English
Abstract
CABLE LOGGING
CABLES
Cable life
INSPECTION SYSTEM
ELECTROMEGNETIC WIRE ROPE INSPECTION (EWRI)
Prototype
Documents
Less detail

Investigation of fire performance of CLT manufactured with thin laminates

https://library.fpinnovations.ca/en/permalink/fpipub40149
Author
Dagenais, Christian
Date
March 2016
Material Type
Research report
Field
Sustainable Construction
FPInnovations Investigation of Fire Performance of CLT Manufactured with Thin Laminates Date
Author
Dagenais, Christian
Contributor
Forestry Innovation Investment
Date
March 2016
Material Type
Research report
Physical Description
35 p.
Sector
Wood Products
Field
Sustainable Construction
Research Area
Building Systems
Subject
Fire
Resistance
Structural composites
Laminate product
Series Number
E-4965
Location
Québec, Québec
Language
English
Abstract
Nowadays, the fire behavior of CLT panels made from solid-sawn lumber exposed to fire is well known and documented by a number of research organizations and universities. However, due to the desire to optimize how material is used in CLT, and ultimately lower manufacturing costs, CLT with thin laminations ranging from 19 to 25 mm in thickness has started to be produced in North America, which somewhat limits the applicability of some design provisions which were derived and validated from CLT made with 35-mm laminations. There is currently limited research on CLT manufactured with thin laminations, namely with respect to their fire behavior and specifically the effective charring rate. Several charring models have been developed over the years to predict the char front of CLT elements exposed to a standard fire curve (e.g. CAN/ULC S101 and ASTM E119). Some models aimed at predicting the char front at any given time, while others were developed based on experimental time-to-failure, using an average charring rate. While these models result in similar char depths at the time-to-failure, the results from this fire test series demonstrate the non-linear impact on the charring rate from using thin laminations in the manufacturing of CLT elements. Using a “one-rate-fits-all” effective charring rate may work when trying to replicate “time-to-failure”, but such approach provides inconsistent and overly conservative predictions of char depths, thus structural fire-resistance, when there is a need to evaluate the depth of char at any time less than the time-to-failure. In order to address the lack of consistency in the charring models of CLT with thin laminations, FPInnovations conducted a series of fire tests to further evaluate and document the impact on the charring rate from using thin laminations. The objective of this study is to evaluate the charring behavior of CLT manufactured in accordance with ANSI/APA PRG-320 [1] with thin laminations of various thicknesses (less than 35 mm). From the data generated in this test series, it can be observed that when the first lamination is charred through to the glue line, the general trend is that the charring rate in subsequent laminations experiences a significant increase whether it is a CLT floor or wall element. The sharp changes in the temperature profiles recorded at the glue lines suggest that such behavior is most likely attributed to the adhesive heat performance, where heat delamination (fall-off) is observed when the glue lines reaches temperatures ranging between 115 to 250ºC. It was also found that the 1st lamination seems to char at a fairly uniform rate, whether it is a floor or a wall element and regardless of its thickness. The traditional one-dimensional charring rate of 0.65 mm/min may be used for the 1st lamination of CLT elements. However, the subsequent laminations char at a much faster rate, ranging from 0.59 to 1.07 mm/min, depending on the lamination thickness and its location within the CLT configuration. The results from this fire test series demonstrate that if no changes are made to the adhesives currently used, the impact from using thin laminations in CLT elements is not fully captured by charring models using a “one-rate-fits-all” approach. Charring models need to be adapted to explicitly account for lamination thickness. When compared to the test data, the current 2014 Canadian CLT Handbook provides reasonable, while slightly greater, charring rates based on the thickness of laminations for the 2nd and subsequent laminations. As such, some recommendations are provided herein for future improvement of existing CLT charring models and consideration at the CSA O86 Technical Committee. It is demonstrated that the proposed changes predict char depths that closely track at any given time the actual char depths as observed during a standard fire exposure test. 301010618
Documents
Less detail

Windrow burning exploratory research Beaver Ranch, Alberta

https://library.fpinnovations.ca/en/permalink/fpipub7424
Author
Baxter, Greg
Hunt, Kevin
Roy, Campbell
Date
November 2016
Edition
49633
Material Type
research report
Field
Fibre Supply
. Given the requirement for land owners to have burning permits during “Fire Season” (March 1st
Author
Baxter, Greg
Hunt, Kevin
Roy, Campbell
Date
November 2016
Edition
49633
Material Type
research report
Physical Description
2 p.
Sector
Forest Operations
Field
Fibre Supply
Research Area
Wildfire Operations
Subject
Fire
Risk assessment
Safety
Testing
Smoke
Series Number
InfoNote ; 2016 n.15
Language
English
Abstract
Northwestern Alberta has been a focal point for agricultural expansion for many years. More recently, accelerated lands sales have led to the clearing of large tracks of land and significant burning projects aimed at preparing the land for agricultural use. Given the requirement for land owners to have burning permits during “Fire Season” (March 1st – October 31st) and the risks involved in large scale burning during fire season, sites are often differed to time frames outside the established fire season. Although windrow burning outside of fire season often poses less fire escape risk, other issues can arise and result in public safety concerns e.g. smoke, which can increase the potential for health issues and traffic accidents. Given these concerns local forestry and municipal authorities have engaged in discussions aimed at identifying potential burning options.
Documents

InfoNote2016N15.pdf

Read Online Download
Less detail

9 records – page 1 of 1.