Skip header and navigation

3 records – page 1 of 1.

Dual purpose fire retardant adhesive with improved temperature stable bonds

https://library.fpinnovations.ca/en/permalink/fpipub38747
Contributor
Department of Supply and Services
Forintek Canada Corp.
Date
1979
Material Type
Research report
Field
Sustainable Construction
to manufacture plywood panels for use m interior applications. In this application, the adhesive, besides
Contributor
Department of Supply and Services
Forintek Canada Corp.
Date
1979
Material Type
Research report
Physical Description
14 p.
Sector
Wood Products
Field
Sustainable Construction
Research Area
Building Systems
Subject
Panels
Adhesives
Location
Ottawa, Ontario
Language
English
Abstract
Panel Products
Adhesive
Fire Retardant - Adhesive
Documents
Less detail

Optimization of steam injection pressing for veneer panel products

https://library.fpinnovations.ca/en/permalink/fpipub37445
Author
Andersen, Axel W.
Troughton, G.E.
Date
April 1997
Material Type
Research report
Field
Wood Manufacturing & Digitalization
was found to be an optimum steam-injection time for LVL. All the panels prepared under a variety of steam
Author
Andersen, Axel W.
Troughton, G.E.
Date
April 1997
Material Type
Research report
Physical Description
15 p.
Sector
Wood Products
Field
Wood Manufacturing & Digitalization
Research Area
Advanced Wood Manufacturing
Subject
Veneer manufacturing
Veneer
Pressing
Plywood manufacture
Plywood
Panels
Laminate product
Series Number
Project No. 1070
W-1404
Location
Vancouver, British Columbia
Language
English
Abstract
Experiments were conducted to evaluate steam-injection pressing of plywood and LVL using saturated and superheated steam conditions. Three steam-injection times of one, two and three minutes were used to prepare 7-ply plywood and steam-injection times of three, five, seven, and nine minutes were used to prepare LVL. The results showed optimum pressing times were achieved with the steam-injection times of one and two minutes for the 7-ply plywood and seven minutes was found to be an optimum steam-injection time for LVL. All the panels prepared under a variety of steam conditions exhibited excellent bond quality and the average % wood failure was greater than 80% in all cases. For the preparation of the 7-ply plywood and LVL, using the optimum steam-injection times for both superheated and saturated steam conditions, the pressing time was reduced by over 30% compared to conventional platen heating. An economic analysis of return on investment for thick plywood products and LVL shows the pay-back period for retrofitting an existing plywood or LVL press for steam injection is less than three months.
Lumber, Laminated veneer - Pressing
Lumber, Laminated veneer - Manufacture
Veneers - Pressing
Veneers - Manufacture
Plywood - Panels - Pressing
Plywood - Manufacture
Documents
Less detail

OSB panels for lamination

https://library.fpinnovations.ca/en/permalink/fpipub41797
Author
Calvé, Louis R.
Ganev, S.
Lefebvre, M.
Date
April 1997
Material Type
Research report
Field
Wood Manufacturing & Digitalization
£ io o L *pdF Project No. 1137 Canadian Forest Service OSB PANELS FO R LAMINATION by Louis
Author
Calvé, Louis R.
Ganev, S.
Lefebvre, M.
Date
April 1997
Material Type
Research report
Physical Description
19 p.
Sector
Wood Products
Field
Wood Manufacturing & Digitalization
Research Area
Advanced Wood Manufacturing
Subject
Panels
Oriented strandboard
Series Number
CFS report 1137
E-3006
Location
Sainte-Foy, Québec
Language
English
Abstract
OSB Panels
Lamination
Documents
Less detail