Skip header and navigation

3 records – page 1 of 1.

Accelerated durability testing of wood-base fiber and particle panel materials

https://library.fpinnovations.ca/en/permalink/fpipub1494
Author
Unligil, H.H.
Date
March 1982
Edition
37999
Material Type
Research report
Field
Wood Manufacturing & Digitalization
considerable interest has developed in expanding the market by producing panels suitable for new areas
Author
Unligil, H.H.
Date
March 1982
Edition
37999
Material Type
Research report
Physical Description
7 p.
Sector
Wood Products
Field
Wood Manufacturing & Digitalization
Research Area
Advanced Wood Manufacturing
Subject
Wood
Panels
Materials
Series Number
CFS/DSS project no 12/81-82
3-65-57-016
E-23
Location
Ottawa, Ontario
Language
English
Abstract
Composite materials - Durability
Wood-based panels
Wood-based panels - Durability
Wood Based Composites
Documents
Less detail

Exterior weathering of panel products

https://library.fpinnovations.ca/en/permalink/fpipub5664
Author
Alexopoulos, J.
Davis, A.R.
Date
March 1985
Edition
38679
Material Type
Research report
Field
Wood Manufacturing & Digitalization
. INTRODUCTION A study was initiated in 1983 to evaluate the durability of waferboard and other composite panels
Author
Alexopoulos, J.
Davis, A.R.
Date
March 1985
Edition
38679
Material Type
Research report
Physical Description
13 p.
Sector
Wood Products
Field
Wood Manufacturing & Digitalization
Research Area
Advanced Wood Manufacturing
Subject
Weathering
Panels
Series Number
036010003
E-1932
Location
Ottawa, Ontario
Language
English
Abstract
This second status report describes the effects of 1 year exterior weathering at the Ottawa site and three accelerated aging tests on thickness, bending properties, internal bond strength, surface hardness, and nail withdrawal resistance of small specimens of two commercial waferboards. Following 1 year exterior weathering, all but two properties of random short wafer waferboards were adversely affected to a greater extent than aligned long wafer specimens. Thickness change and internal bond strength retention were more or less equal for the two waferboards. Relative to 1 year exterior weathering, accelerated aging was more severe in all cases except modulus of rupture following the AFNOR V 313 test and modulus of elasticity following both the AFNOR V 313 test and the ASTM 6-cycle test. Of the three accelerated aging tests studied, the AFNOR V 313 test was the least severe followed by the ASTM 6-cycle test and the CSA 2-hour boil, the most severe test. A second outdoor test site was set up in Saskatoon, Saskatchewan and similar waferboards were mounted for exposure.
Panel Products
Exterior
Weathering
Documents
Less detail

Fire performance of panel products

https://library.fpinnovations.ca/en/permalink/fpipub38053
Author
Richardson, L.R.
Cornelissen, Alicje A.
Date
March 1985
Material Type
Research report
Field
Sustainable Construction
Author
Richardson, L.R.
Cornelissen, Alicje A.
Date
March 1985
Material Type
Research report
Physical Description
43 p.
Sector
Wood Products
Field
Sustainable Construction
Research Area
Building Systems
Subject
Testing
Research
Panels tests
Panels
Series Number
CFS/DSS project no 24/84-85
Project no.50-12-201
E-136
Location
Ottawa, Ontario
Language
English
Abstract
Fire-testing - Research
Panels - Tests, Fire
Documents
Less detail