Passer en-tête et de la navigation

13 notices – page 1 de 2.

Drying of balsam and subalpine fir: for a better understanding

https://library.fpinnovations.ca/fr/permalink/fpipub52906
Auteur
Lavoie, Vincent
Date
November 2019
Genre du document
Research report
Domaine
Wood Manufacturing & Digitalization
moisture content Wet pockets Vincent Lavoie, Senior Researcher, Smart Manufacturing DRYING OF BALSAM
Auteur
Lavoie, Vincent
Date
November 2019
Genre du document
Research report
Description physique
4 p.
Secteur
Wood Products
Domaine
Wood Manufacturing & Digitalization
Champ de recherche
Advanced Wood Manufacturing
Sujet
Air drying
Balsam
Drying
Fir
Logs
Lumber
Moisture content
Performance
Sawmills
Subalpine fir
Wet pockets
Wood yards
Série
FPI WP 2019
Langue
English
Résumé
The findings of recent studies from both eastern and western Canada have shown that the drying behaviour of subalpine fir (A. lasiocarpa) and balsam fir (A. balsamea) is similar, which allows common solutions to be applied based on research conducted on one species of fir or the other. This article summarizes previous research findings and good practices that can be adopted in the short term to improve the drying of fir.
Documents
Moins de détails

Séchage du sapin baumier et subalpin: pour une meilleur compréhension

https://library.fpinnovations.ca/fr/permalink/fpipub52907
Auteur
Lavoie, Vincent
Date
November 2019
Genre du document
Research report
Domaine
Wood Manufacturing & Digitalization
Auteur
Lavoie, Vincent
Date
November 2019
Genre du document
Research report
Description physique
4 p.
Secteur
Wood Products
Domaine
Wood Manufacturing & Digitalization
Champ de recherche
Advanced Wood Manufacturing
Sujet
Air drying
Balsam
Drying
Fir
Logs
Lumber
Moisture content
Performance
Sawmills
Subalpine fir
Wet pockets
Wood yards
Série
FPI WP 2019
Langue
French
Résumé
Des travaux récents tant dans l’est que dans l’ouest du Canada ont montré que le comportement au séchage du sapin subalpin (A. lasiocarpa) et du sapin baumier (A. balsamea) est similaire, ce qui permet une application de solutions communes à partir de travaux effectués sur l’une ou l’autre variété de sapin. Le présent document se veut une revue sommaire de résultats de travaux antérieurs et de bonnes pratiques pouvant être adoptées à court terme pour améliorer le séchage de cette essence.
Documents
Moins de détails

Moisture evaluation and veneer peeling of douglas fir and spruce logs from different mills and log yard age inventories

https://library.fpinnovations.ca/fr/permalink/fpipub49466
Auteur
Semple, Katherine
Dai, Chunping
Date
August 2017
Genre du document
Research report
Domaine
Wood Manufacturing & Digitalization
Auteur
Semple, Katherine
Dai, Chunping
Date
August 2017
Genre du document
Research report
Description physique
69 p.
Secteur
Wood Products
Domaine
Wood Manufacturing & Digitalization
Champ de recherche
Advanced Wood Manufacturing
Sujet
Moisture content
Veneer
Fir
Spruce
Storing
Langue
English
Résumé
A total of 48 peeler blocks and 256 mini-billets were sampled from mills to investigate the effects of yard storage time, and artificial yard drying and sprinkling on residual moisture contents (MCs) and veneer quality. MC in fresh and stored log inventories varied greatly across mills according to geographic location of their wood supply zones, bark damage and loss, and storage time and conditions. The main findings were as follows: 1. DF logs supplied by three BC mills from the Cariboo, Thompson Okanagan, or Kootenay regions were highly variable in wood MC. 2. Winter-cut DF logs with high sapwood MC stored had good bark retention and high moisture retention over 6 and 9 winter-spring months. No effects on veneer peeling roughness from longer-term winter storage up to 9 months. 3. Summer-cut logs had little or no residual bark, or the bark slipped off very easily during debarking. Exposed, bark-free summer-cut logs can dry and crack on edges and ends very quickly, within a few weeks. 4. A marked decline in veneer quality with piling time in Summer for spruce and DF, suggesting an optimum window of processing of such exposed logs of about two weeks. Veneer quality and recovery suffered markedly once the logs had fully air dried mainly because of edge splits creating natural fragmentation of the ribbon. 5. Mills receiving dry-zone logs with much lower MC have a very limited storage window, especially over winter. As little as 2-3 weeks if bark is damaged or missing. 6. Veneer quality could not be definitively tied to log residual MC. Under the controlled laboratory conditions used here it was observed that peeling quality could still be good at low sapwood MC (35-40%) and or very high (MC>100%). Whether this is still the case in mill production is unknown. 7. Logs must never be allowed to fall below FSP and develop edge-checks or deep end checks. 8. Wax emulsion end sealants were effective at hampering drying and end checking on high MC logs, but not effective on low MC logs. 9. Sprinkling retained log freshness and peel quality in high MC DF for several months and prevented log drying and end splitting as well as inner log staining. Ends absorbed considerable extra moisture. Some variability in peel quality was noted. 10. The prototype EM1000 Ground Penetrating Radar could only be reliably used in log edge mode in DF. The unit would also require re-calibration for the very high sapwood MC in spruce and wet-zone DF logs.
Documents
Moins de détails

Kiln drying of SPF dimension lumber

https://library.fpinnovations.ca/fr/permalink/fpipub7505
Auteur
Oliveira, Luiz C.
Lazarescu, Ciprian
Star, Phil
Date
April 2015
Édition
49807
Genre du document
Research report
Domaine
Wood Manufacturing & Digitalization
.................................................................................................................................................. 9 3.1 Moisture Content Distribution
Auteur
Oliveira, Luiz C.
Lazarescu, Ciprian
Star, Phil
Date
April 2015
Édition
49807
Genre du document
Research report
Description physique
17 p.
Secteur
Wood Products
Domaine
Wood Manufacturing & Digitalization
Champ de recherche
Advanced Wood Manufacturing
Sujet
Lumber
Spruce Pine Fir
Drying
Moisture content
Langue
English
Résumé
In British Columbia, due to the decline of lodgepole pine, mills should expect higher volumes of sub-alpine fir in their species mix. The impact on drying is significant. For example, drying times for green SPF (spruce, pine, sub-alpine fir) vary from 24 to 36 hours whereas drying times for sub-alpine fir can easily exceed 70 hours. In addition to longer drying times, the drying of species such as sub-alpine fir using current procedures often results in wet lumber and value loss can be higher than $100 per Mfbm. The potential annual impact for a typical BC mill is estimated to be in the range $1,000,000 to $1,500,000. Along the years, sawmills have invested millions of dollars in drying technology (conventional drying and green sorting systems) which, for the most part are efficient and relatively low cost. Thus, under the circumstances outlined above, sawmills urgently need to find ways to minimize the problems associated with the drying of sub-alpine fir that is, new procedures or combination of methods, to ensure maximum grade recovery at the end of drying and reduce drying times (increase productivity and lower processing costs). In addition, the pressure exerted by typical longer drying times for sub-alpine fir will impact the drying of spruce and pine. Thus, strategies to speed the drying for those two species are needed to maintain annual production targets. The main objective of this project is to evaluate several strategies using existing technology so that sawmills can readily implement them throughout their drying operations dealing with larger volumes of sub-alpine fir and for mills with kiln capacity constraints which could compromise their production targets.
Documents
Moins de détails

Study to examine the effects of log moisture sorting on OSB manufacturing

https://library.fpinnovations.ca/fr/permalink/fpipub39823
Auteur
Groves, C. Kevin
Date
May 2014
Genre du document
Research report
Domaine
Wood Manufacturing & Digitalization
) study was carried-out to better understand the effects of log moisture content on the manufacturing
Auteur
Groves, C. Kevin
Collaborateur
Natural Resources Canada. Canadian Forest Service.
Date
May 2014
Genre du document
Research report
Description physique
28 p.
Secteur
Wood Products
Domaine
Wood Manufacturing & Digitalization
Champ de recherche
Advanced Wood Manufacturing
Sujet
Logs
Moisture content
OSB
Sorting
Série
W-3096
Langue
English
Résumé
In the Canadian OSB industry raw log moistures are generally thought to be a significant factor effecting mill operation. In 2012/13 an FPInnovations study was carried out to better understand the effects of log moisture content on the manufacturing operations at a western Canadian OSB mill. The information collected was intended to assist the mill to make informed decisions on log yard management and harvesting and also to understand the best possible scenarios for producing a quality product as cost effectively as possible. Of particular interest was whether benefits could be made by processing dryer wood as a means of increasing dryer capacity but without incurring significant costs resulting from lower strand quality, especially fines and the associated costs of increased resin usage and panel density.
Documents
Moins de détails

Essai d'un humidimètre NIR pour mesurer la teneur en humidité de bois feuillu

https://library.fpinnovations.ca/fr/permalink/fpipub5777
Auteur
Lavoie, Vincent
Lejeune, Claude
Tanguay, F.
Dupont, Danick
Ding, Feng
Date
March 2013
Édition
39752
Genre du document
Research report
Domaine
Wood Manufacturing & Digitalization
Auteur
Lavoie, Vincent
Lejeune, Claude
Tanguay, F.
Dupont, Danick
Ding, Feng
Collaborateur
CRIQ
Date
March 2013
Édition
39752
Genre du document
Research report
Description physique
27 p.
Secteur
Wood Products
Domaine
Wood Manufacturing & Digitalization
Champ de recherche
Advanced Wood Manufacturing
Sujet
Drying
Moisture content
Hardwoods
Localisation
Québec, Québec
Langue
French
Résumé
Le mandat du projet consiste en la réalisation d’essais avec un équipement d’acquisition générique NIR (Near Infrared) dans le but de développer des modèles mathématiques pouvant être utilisés pour déterminer le taux d’humidité des planches de bois franc pour quatre essences : le chêne rouge, l’érable à sucre, le merisier et l’érable argenté. Une fois les modèles développés les objectifs plus spécifiques sont d’évaluer le niveau de précision de mesure de la teneur en humidité sur du bois parfaitement équilibré ainsi que déterminer les impacts sur les lectures provenant des facteurs suivants : l’essence, la densité, la qualité de surface, la température du bois, le gradient de teneur en humidité ainsi que la vitesse de passage des planches. Finalement, des essais doivent être réalisés sur du bois provenant directement de l’industrie et n’ayant subi aucun traitement d’équilibrage en laboratoire pour connaître le niveau de précision de lecture dans ces conditions.
MOISTURE METERS
HARDWOODS
Documents
Moins de détails

Influence of moisture content and temperature on the performance of fingerjointed lumber

https://library.fpinnovations.ca/fr/permalink/fpipub42354
Auteur
Mohammad, M.
Date
July 2003
Genre du document
Pamphlet
Domaine
Wood Manufacturing & Digitalization
to know how the wood’s moisture content and temperature affect the quality of the end product
Auteur
Mohammad, M.
Date
July 2003
Genre du document
Pamphlet
Description physique
4 p.
Secteur
Wood Products
Domaine
Wood Manufacturing & Digitalization
Champ de recherche
Advanced Wood Manufacturing
Sujet
Moisture content
Série
Technology Profile ; TP-03-02E
E-4028
Localisation
Sainte-Foy, Québec
Langue
English
Résumé
The process of fingerjointing is complex and requires numerous efforts in order to evaluate the various workable and optimum conditions of jointed wood members. Many factors are known to affect the strength of fingerjoints. Some are related to wood, such as species, density, natural defects, moisture content (MC), temperature, and gluability of the species. Others are related to wood machining, including type of adhesive and gluing processes, such as condition of the cutting tools, curing time and applied assembling pressure.
Moisture content
Temperature - Influence on mechanical properties
Glued joints - Finger
Documents
Moins de détails

Review of moisture measuring technologies used in the solid wood products industry

https://library.fpinnovations.ca/fr/permalink/fpipub39749
Auteur
Garrahan, Peter A.
McRae, David
Date
2000
Genre du document
Research report
Domaine
Wood Manufacturing & Digitalization
of commonly employed equipment and procedures for evaluation of moisture content in solid-wood products
Auteur
Garrahan, Peter A.
McRae, David
Collaborateur
Sundance Forest Industries Ltd. Alberta Government. Department of Alberta Innovation and Science
Date
2000
Genre du document
Research report
Description physique
35 p.
Secteur
Wood Products
Domaine
Wood Manufacturing & Digitalization
Champ de recherche
Advanced Wood Manufacturing
Sujet
Drying
Moisture content
Série
W-3047
Localisation
Edmonton, Alberta
Langue
English
Résumé
This study involved the on-site evaluation of commonly employed equipment and procedures for evaluation of moisture content in solid-wood products. Specifically, a DC-resistance and two RF-based moisture meters were evaluated. The main overall objective was to identify procedures or develop information to allow more accurate final MC estimates to be determined. Lodgepole pine lumber of 25 and 40 mm thicknesses was employed for the test Material was tested at three time intervals spanning from the completion of drying to approximately 30 hours after drying. Meter readings were compared against oven-dry moisture contents. In most situations the moisture meters employed tended to underestimate final moisture content with the error varying from close to zero up to about 3 percent. The errors observed seemed to be consistent for a given test. This opens the possibility of employing site-specific correction factors to obtain better estimates of oven-dry moisture content. Problems may still arise when comparing mill results of moisture tests against those performed elsewhere by customers and end users.
SEASONING
Moisture measurement
Documents
Moins de détails

Facteurs influant sur la precision de la lecture du degre d'humidite d'un hygrometre a usage continu (Mars 1989)

https://library.fpinnovations.ca/fr/permalink/fpipub5647
Auteur
Garrahan, Peter A.
Pfaff, Frank
Morin, M.
Date
March 1991
Édition
38439
Genre du document
Research report
Domaine
Wood Manufacturing & Digitalization
- applications to moisture content measurement. Compte rendu du séminaire sur la technologie du balayage
Auteur
Garrahan, Peter A.
Pfaff, Frank
Morin, M.
Date
March 1991
Édition
38439
Genre du document
Research report
Description physique
30 p.
Secteur
Wood Products
Domaine
Wood Manufacturing & Digitalization
Champ de recherche
Advanced Wood Manufacturing
Sujet
Moisture content
Série
E-1273
Localisation
Ottawa, Ontario
Langue
French
Résumé
Moisture Determination, Electrical - Accuracy
Moisture Meters (In-line)
Documents
Moins de détails

Factors influencing accuracy of MC estimates from an in-line moisture meter

https://library.fpinnovations.ca/fr/permalink/fpipub38333
Auteur
Garrahan, Peter A.
Pfaff, Frank
Date
March 1989
Genre du document
Research report
Domaine
Wood Manufacturing & Digitalization
Auteur
Garrahan, Peter A.
Pfaff, Frank
Date
March 1989
Genre du document
Research report
Description physique
33 p.
Secteur
Wood Products
Domaine
Wood Manufacturing & Digitalization
Champ de recherche
Advanced Wood Manufacturing
Sujet
Moisture content
Série
3743K404
E-1069
Localisation
Ottawa, Ontario
Langue
English
Résumé
Moisture Determination, Electrical - Accuracy
Moisture Meters, In-line
Documents
Moins de détails

13 notices – page 1 of 2.